Best straps for the Ball Engineer Hydrocarbon Original
20 mm lugs, 40 mm case. Try a strap below; the drawing is to scale.
Strap
Colour: Steel
Strap width20 mm
At the buckle16 mm
Lug to lug (est.)47 mm
Looks that work on the Ball Engineer Hydrocarbon Original
Ball Engineer Hydrocarbon Original specs
- Case
- 40 mm × 13.8 mm thick
- Lug width
- 20 mm
- Case material
- stainless steel
- Movement
- Ball RR1102, automatic
- Water resistance
- 300 m
We couldn't confirm these sizes from a published spec sheet, so they're our best estimate. Measure your lug width before you buy: here's how.
Strap size for the Ball Engineer Hydrocarbon Original
What size strap fits the Ball Engineer Hydrocarbon Original?
The Ball Engineer Hydrocarbon Original takes 20 mm straps: its lug width is 20 mm. A leather strap will usually taper to 18 mm at the buckle.
How big is the Ball Engineer Hydrocarbon Original?
The case is 40 mm across, and about 47 mm from lug tip to lug tip.
What strap looks best on the Ball Engineer Hydrocarbon Original?
Good options are a black rubber strap, a black and grey stripe NATO strap, a taupe suede strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.