Best straps for the Bell & Ross BR 03-92 Diver
24 mm lugs, 42 mm case (since 2017). Try a strap below; the drawing is to scale.
Strap
Colour: Black
Strap width24 mm
At the buckle22 mm
Lug to lug42 mm
Looks that work on the Bell & Ross BR 03-92 Diver
Bell & Ross BR 03-92 Diver specs
- Made
- since 2017
- Case
- 42 mm × 12 mm thick, square
- Lug width
- 24 mm
- Lug to lug
- 42 mm
- Case material
- stainless steel
- Movement
- BR-CAL.302, automatic
- Water resistance
- 300 m
From the maker's published figures, gathered with AI help and not yet checked against a watch in hand. Measure your lugs before you buy.
Strap size for the Bell & Ross BR 03-92 Diver
What size strap fits the Bell & Ross BR 03-92 Diver?
The Bell & Ross BR 03-92 Diver takes 24 mm straps: its lug width is 24 mm. A leather strap will usually taper to 22 mm at the buckle.
How big is the Bell & Ross BR 03-92 Diver?
The case is 42 mm across, and about 42 mm from lug tip to lug tip.
What strap looks best on the Bell & Ross BR 03-92 Diver?
Good options are a steel three-link bracelet, a black and grey stripe NATO strap, a taupe suede strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.