Best straps for the Bell & Ross BR-X1
24 mm lugs, 45 mm case (since 2014). Try a strap below; the drawing is to scale.
Strap
Colour: Black
Strap width24 mm
At the buckle22 mm
Lug to lug (est.)52.5 mm
Looks that work on the Bell & Ross BR-X1
Bell & Ross BR-X1 specs
- Made
- since 2014
- Case
- 45 mm, square
- Lug width
- 24 mm
- Case material
- titanium
- Movement
- BR-CAL.313, automatic skeleton chronograph
- Water resistance
- 100 m
We couldn't confirm these sizes from a published spec sheet, so they're our best estimate. Measure your lug width before you buy: here's how.
Strap size for the Bell & Ross BR-X1
What size strap fits the Bell & Ross BR-X1?
The Bell & Ross BR-X1 takes 24 mm straps: its lug width is 24 mm. A leather strap will usually taper to 22 mm at the buckle.
How big is the Bell & Ross BR-X1?
The case is 45 mm across, and about 52.5 mm from lug tip to lug tip.
What strap looks best on the Bell & Ross BR-X1?
Good options are an oxblood leather strap, a black three-link bracelet, a grey suede strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.