Best straps for the Boldr Supply Diver
20 mm lugs, 40 mm case. Try a strap below; the drawing is to scale.
Strap
Colour: Steel
Strap width20 mm
At the buckle16 mm
Lug to lug48 mm
Looks that work on the Boldr Supply Diver
Boldr Supply Diver specs
- Case
- 40 mm × 13 mm thick
- Lug width
- 20 mm
- Lug to lug
- 48 mm
- Case material
- stainless steel
- Movement
- Seiko NH35, automatic
- Water resistance
- 200 m
We couldn't confirm these sizes from a published spec sheet, so they're our best estimate. Measure your lug width before you buy: here's how.
Strap size for the Boldr Supply Diver
What size strap fits the Boldr Supply Diver?
The Boldr Supply Diver takes 20 mm straps: its lug width is 20 mm. A leather strap will usually taper to 18 mm at the buckle.
How big is the Boldr Supply Diver?
The case is 40 mm across, and about 48 mm from lug tip to lug tip.
What strap looks best on the Boldr Supply Diver?
Good options are a black rubber strap, a black and grey stripe NATO strap, a taupe suede strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.