Best straps for the Christopher Ward C60 Trident GMT 600 40mm
20 mm lugs, 40 mm case (since 2020). Try a strap below; the drawing is to scale.
Strap
Colour: Steel
Strap width20 mm
At the buckle16 mm
Lug to lug47.2 mm
Looks that work on the Christopher Ward C60 Trident GMT 600 40mm
Christopher Ward C60 Trident GMT 600 40mm specs
- Made
- since 2020
- Case
- 40 mm × 12.6 mm thick
- Lug width
- 20 mm
- Lug to lug
- 47.2 mm
- Case material
- Stainless steel
- Movement
- Sellita SW330-2, automatic GMT
- Water resistance
- 600 m
From the maker's published figures, gathered with AI help and not yet checked against a watch in hand. Measure your lugs before you buy.
Strap size for the Christopher Ward C60 Trident GMT 600 40mm
What size strap fits the Christopher Ward C60 Trident GMT 600 40mm?
The Christopher Ward C60 Trident GMT 600 40mm takes 20 mm straps: its lug width is 20 mm. A leather strap will usually taper to 18 mm at the buckle.
How big is the Christopher Ward C60 Trident GMT 600 40mm?
The case is 40 mm across, and about 47.2 mm from lug tip to lug tip.
What strap looks best on the Christopher Ward C60 Trident GMT 600 40mm?
Good options are a black rubber strap, a black and grey stripe NATO strap, a taupe suede strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.