Best straps for the Doxa SUB 300 Conquistador
20 mm lugs, 42 mm case (1969–1975). Try a strap below; the drawing is to scale.
Strap
Colour: Steel
Strap width20 mm
At the buckle16 mm
Lug to lug45 mm
Looks that work on the Doxa SUB 300 Conquistador
Doxa SUB 300 Conquistador specs
- Made
- 1969–1975
- Case
- 42 mm, cushion
- Lug width
- 20 mm
- Lug to lug
- 45 mm
- Case material
- stainless steel
- Movement
- ETA 2783, automatic
- Water resistance
- 300 m
- Nickname
- Conquistador
From the maker's published figures, gathered with AI help and not yet checked against a watch in hand. Measure your lugs before you buy.
Strap size for the Doxa SUB 300 Conquistador
What size strap fits the Doxa SUB 300 Conquistador?
The Doxa SUB 300 Conquistador takes 20 mm straps: its lug width is 20 mm. A leather strap will usually taper to 18 mm at the buckle.
How big is the Doxa SUB 300 Conquistador?
The case is 42 mm across, and about 45 mm from lug tip to lug tip.
What strap looks best on the Doxa SUB 300 Conquistador?
Good options are a black rubber strap, a black and grey stripe NATO strap, a taupe suede strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.