Best straps for the Farer Aqua Compressor
20 mm lugs, 41 mm case. Try a strap below; the drawing is to scale.
Strap
Colour: Navy
Strap width20 mm
At the buckle18 mm
Lug to lug48 mm
Looks that work on the Farer Aqua Compressor
Farer Aqua Compressor specs
- Case
- 41 mm × 12.5 mm thick
- Lug width
- 20 mm
- Lug to lug
- 48 mm
- Case material
- stainless steel
- Movement
- Sellita SW200-1, automatic
- Water resistance
- 200 m
From the maker's published figures, gathered with AI help and not yet checked against a watch in hand. Measure your lugs before you buy.
Strap size for the Farer Aqua Compressor
What size strap fits the Farer Aqua Compressor?
The Farer Aqua Compressor takes 20 mm straps: its lug width is 20 mm. A leather strap will usually taper to 18 mm at the buckle.
How big is the Farer Aqua Compressor?
The case is 41 mm across, and about 48 mm from lug tip to lug tip.
What strap looks best on the Farer Aqua Compressor?
Good options are a black rubber strap, a steel three-link bracelet, a navy, red and green NATO strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.