Best straps for the Longines Single Push-Piece Chronograph
20 mm lugs, 40 mm case, reference L2.800.4.23.2. Try a strap below; the drawing is to scale.
Strap
Colour: Black
Strap width20 mm
At the buckle18 mm
Lug to lug (est.)47 mm
Looks that work on the Longines Single Push-Piece Chronograph
Longines Single Push-Piece Chronograph specs
- Case
- 40 mm × 14.3 mm thick
- Lug width
- 20 mm
- Case material
- stainless steel
- Movement
- Calibre L788.2, automatic monopusher chronograph
- Water resistance
- 30 m
From the maker's published figures, gathered with AI help and not yet checked against a watch in hand. Measure your lugs before you buy.
Strap size for the Longines Single Push-Piece Chronograph
What size strap fits the Longines Single Push-Piece Chronograph?
The Longines Single Push-Piece Chronograph takes 20 mm straps: its lug width is 20 mm. A leather strap will usually taper to 18 mm at the buckle.
How big is the Longines Single Push-Piece Chronograph?
The case is 40 mm across, and about 47 mm from lug tip to lug tip.
What strap looks best on the Longines Single Push-Piece Chronograph?
Good options are a steel three-link bracelet, a grey suede strap, a black and grey stripe NATO strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.