Best straps for the Rolex Cosmograph Daytona
20 mm lugs, 37 mm case, reference 6263 (1970–1988). Try a strap below; the drawing is to scale.
Strap
Colour: Steel
Strap width20 mm
At the buckle16 mm
Lug to lug44 mm
Looks that work on the Rolex Cosmograph Daytona
Rolex Cosmograph Daytona specs
- Made
- 1970–1988
- Case
- 37 mm × 13 mm thick
- Lug width
- 20 mm
- Lug to lug
- 44 mm
- Case material
- Stainless steel
- Movement
- Calibre 727, manual-wind chronograph
- Water resistance
- 50 m
From the maker's published figures, gathered with AI help and not yet checked against a watch in hand. Measure your lugs before you buy.
Strap size for the Rolex Cosmograph Daytona
What size strap fits the Rolex Cosmograph Daytona?
The Rolex Cosmograph Daytona takes 20 mm straps: its lug width is 20 mm. A leather strap will usually taper to 18 mm at the buckle.
How big is the Rolex Cosmograph Daytona?
The case is 37 mm across, and about 44 mm from lug tip to lug tip.
What strap looks best on the Rolex Cosmograph Daytona?
Good options are an oxblood leather strap, a grey suede strap, a black and grey stripe NATO strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.