Best straps for the Ball Engineer II Marvelight
20 mm lugs, 40 mm case, reference NM2026C. Try a strap below; the drawing is to scale.
Strap
Colour: Steel
Strap width20 mm
At the buckle16 mm
Lug to lug (est.)47 mm
Looks that work on the Ball Engineer II Marvelight
Ball Engineer II Marvelight specs
- Case
- 40 mm × 13.2 mm thick
- Lug width
- 20 mm
- Case material
- stainless steel
- Movement
- Ball RR1103, automatic
- Water resistance
- 100 m
From the maker's published figures, gathered with AI help and not yet checked against a watch in hand. Measure your lugs before you buy.
Strap size for the Ball Engineer II Marvelight
What size strap fits the Ball Engineer II Marvelight?
The Ball Engineer II Marvelight takes 20 mm straps: its lug width is 20 mm. A leather strap will usually taper to 18 mm at the buckle.
How big is the Ball Engineer II Marvelight?
The case is 40 mm across, and about 47 mm from lug tip to lug tip.
What strap looks best on the Ball Engineer II Marvelight?
Good options are a cognac leather strap, a navy leather strap, a taupe suede strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.