Best straps for the Ball Engineer M Skindiver
20 mm lugs, 41 mm case. Try a strap below; the drawing is to scale.
Strap
Colour: Steel
Strap width20 mm
At the buckle16 mm
Lug to lug (est.)48 mm
Looks that work on the Ball Engineer M Skindiver
Ball Engineer M Skindiver specs
- Case
- 41 mm × 14.2 mm thick
- Lug width
- 20 mm
- Case material
- stainless steel
- Movement
- Ball RRM7309-C, automatic
- Water resistance
- 300 m
From the maker's published figures, gathered with AI help and not yet checked against a watch in hand. Measure your lugs before you buy.
Strap size for the Ball Engineer M Skindiver
What size strap fits the Ball Engineer M Skindiver?
The Ball Engineer M Skindiver takes 20 mm straps: its lug width is 20 mm. A leather strap will usually taper to 18 mm at the buckle.
How big is the Ball Engineer M Skindiver?
The case is 41 mm across, and about 48 mm from lug tip to lug tip.
What strap looks best on the Ball Engineer M Skindiver?
Good options are a black rubber strap, a navy, red and green NATO strap, a taupe suede strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.