Best straps for the Ball Engineer Master II Diver
22 mm lugs, 42 mm case. Try a strap below; the drawing is to scale.
Strap
Colour: Steel
Strap width22 mm
At the buckle18 mm
Lug to lug (est.)49 mm
Looks that work on the Ball Engineer Master II Diver
Ball Engineer Master II Diver specs
- Case
- 42 mm × 15.1 mm thick
- Lug width
- 22 mm
- Case material
- stainless steel
- Movement
- Ball RR1102, automatic
- Water resistance
- 300 m
We couldn't confirm these sizes from a published spec sheet, so they're our best estimate. Measure your lug width before you buy: here's how.
Strap size for the Ball Engineer Master II Diver
What size strap fits the Ball Engineer Master II Diver?
The Ball Engineer Master II Diver takes 22 mm straps: its lug width is 22 mm. A leather strap will usually taper to 20 mm at the buckle.
How big is the Ball Engineer Master II Diver?
The case is 42 mm across, and about 49 mm from lug tip to lug tip.
What strap looks best on the Ball Engineer Master II Diver?
Good options are a black rubber strap, a black and grey stripe NATO strap, a taupe suede strap. Try them all on the drawing above.
Sizes come from published specs. Check yours before you buy: how to measure lug width.